Work begins on at-risk Powys border road hit by collapse

The road between Anchor and Sarn has been closed after a three foot deep hole developed under the road surface <i>(Image: Shropshire Council)</i>
The road between Anchor and Sarn has been closed after a three foot deep hole developed under the road surface (Image: Shropshire Council)
This article is brought to you by our exclusive subscriber partnership with our sister title USA Today, and has been written by our American colleagues. It does not necessarily reflect the view of The Herald.

Repairs have begun on a road on the Powys border which was in danger of “catastrophic failure” is due to be repaired this week.

The Anchor to Sarn road was closed in May after it was found that a three-foot-deep sinkhole was developing underneath a section of the road due to a collapsed culvert.

The issue was discovered after a review of the road by highways teams after forestry work was carried out along the road for several months.

County councillor for Clun, Sam Walmsley said that the forestry work had “caused a lot of damage” and confirmed earlier this month that an emergency closure was in place.

According to Cllr Walmsley, it was found that the road was at “a severe risk of catastrophic failure”.

He has since pushed to get the road repaired “as quickly as possible” which have now begun this week. 

“Repairs to this important section of road have started,” said Cllr Walmsley. 

“This includes both making the damaged culvert safe and repairing surface damage/potholes.

“Had an update from the contractors this morning, they are expecting to have work complete and the road opened again by this weekend.  If I hear of any changes to the plan, will post an update.”

Get involved
with the news

Send your news & photos